πŸ”΄ Kill Switch System Guide

⚠️ CLASSIFIED SECURITY SYSTEM ⚠️
This system will PERMANENTLY DESTROY target VPS instances. Use only in emergency situations.

🎯 System Overview

The Sauron Pro Kill Switch System provides sophisticated emergency destruction capabilities with secured protocols. The system implements a 5-stage destruction process designed to completely annihilate VPS instances while leaving zero forensic traces.

🚨 CRITICAL LIMITATIONS DISCLAIMER 🚨

This kill switch is NOT effective against cloud provider .

What Cloud Providers CAN Access:
β€’ Memory dumps - Complete RAM snapshots via hypervisor
β€’ Disk forensics - Full filesystem access before/after destruction
β€’ Network logs - All traffic patterns permanently logged
β€’ Automated snapshots - Backups taken without your knowledge
β€’ Hypervisor logs - All system calls and process behavior

Kill Switch is Effective Against:
βœ… Physical VPS instances
βœ… Customer detection and immediate response to an intrusion
βœ… Competitor analysis of active testing

Kill Switch is NOT Effective Against:
❌ Cloud provider cooperation
❌ Hypervisor-level forensic analysis
❌ Previously logged network traffic analysis
❌ Existing automated cloud snapshots

Use additional precautions: VPNs, traffic obfuscation, and assume all cloud activity is logged.
πŸ”΄ KILL SWITCH ARCHITECTURE β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β” β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β” β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β” β”‚ MASTER VPS │────│ TARGET VPS │────│ DEAD MAN'S β”‚ β”‚ β”‚ β”‚ β”‚ β”‚ SWITCH β”‚ β”‚ β€’ CLI Tool β”‚ β”‚ β€’ Agent Handler β”‚ β”‚ β”‚ β”‚ β€’ Web Dashboard β”‚ β”‚ β€’ Destruction β”‚ β”‚ β€’ Heartbeat β”‚ β”‚ β€’ Fleet Control β”‚ β”‚ Engine β”‚ β”‚ β€’ Auto-Trigger β”‚ β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜ β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜ β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜ β”‚ β”‚ β”‚ β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”Όβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜ β”‚ β”Œβ”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β” β”‚ DESTRUCTION β”‚ β”‚ LEVELS β”‚ β”‚ β”‚ β”‚ 1. Memory Purge β”‚ β”‚ 2. Data Wipe β”‚ β”‚ 3. System Corruptβ”‚ β”‚ 4. Hardware Killβ”‚ β”‚ 5. Stealth Exit β”‚ β””β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”€β”˜

πŸ’€ Destruction Levels

Level 1: Memory Purge

Duration: 2 seconds

Target: RAM and volatile memory

  • Process memory overwrite
  • Swap file corruption
  • Environment variable clearing
  • Command line argument obfuscation

Level 2: Data Obliteration

Duration: 10 seconds

Target: Application data and logs

  • Database destruction (config.db)
  • 3-pass DOD 5220.22-M deletion
  • Certificate destruction
  • History clearing

Level 3: System Corruption

Duration: 30 seconds

Target: System configuration

  • /etc/passwd corruption
  • SSH config destruction
  • Network interface corruption
  • Boot loader corruption

Level 4: Hardware Destruction

Duration: 60+ seconds

Target: Storage devices

  • Full disk random data wiping
  • Partition table destruction
  • Multiple storage targeting
  • Concurrent operations

Level 5: Stealth Exit

Duration: Final stage

Target: Complete annihilation

  • Process termination
  • Network shutdown
  • Memory cache clearing
  • Kernel panic simulation

πŸ’€ Dead Man's Switch

Purpose: Automatic failsafe

Trigger: Master heartbeat failure

  • Configurable timeouts
  • Automatic activation
  • Master monitoring
  • Emergency protocols

πŸš€ Activation Methods

Method 1: CLI Tool (Recommended)

# Interactive mode (safest) ./scripts/kill-switch.sh # Direct activation (expert mode) ./scripts/kill-switch.sh VPS_ID LEVEL DELAY "REASON" # Fleet-wide destruction ./scripts/kill-switch.sh ALL 5 30 "Emergency protocol Alpha"

Method 2: HTTP API

POST /admin/killswitch Content-Type: application/json { "vps_id": "target-vps-id", "destruction_level": 5, "delay_seconds": 30, "reason": "Emergency activation", "confirmation_code": "Lord Sauron" }

Method 3: Dead Man's Switch Configuration

curl -X POST https://vps.sauron.pro/admin/deadmans \ -H "Authorization: Bearer [FIRESTORE_AUTH]" \ -d '{ "enabled": true, "check_interval": "5m", "master_timeout": "15m", "auto_destruct": true, "destruction_level": 4 }'

πŸ” Security Protocols

Authentication Requirements:
  1. Admin Key: Primary authentication token
  2. Confirmation Code: Must be "Lord Sauron"
  3. Triple Confirmation: CLI requires three separate confirmations

πŸ“Š API Endpoints

Endpoint Method Purpose Authentication
/admin/killswitch POST Master kill switch activation Admin Key + Confirmation
/vps/killswitch POST VPS agent destruction Admin Key
/admin/deadmans GET/POST Dead man's switch config Bearer Token
/vps/heartbeat POST Master heartbeat signal Bearer Token

🚨 Emergency Procedures

Code Red Protocol

Step 1: Immediate fleet destruction
SAURON_ADMIN_KEY="your_key" ./scripts/kill-switch.sh ALL 5 0 "CODE RED PROTOCOL"
Step 2: Verify destruction completion
tail -f /tmp/killswitch-*.log
Step 3: Monitor system logs
journalctl -u sauron -f | grep "KILL SWITCH"

βš™οΈ Configuration Files

Kill Switch Handler

handlers/killswitch.go

  • Master controller logic
  • 5-stage destruction engine
  • Authentication handling
  • Fleet coordination

Dead Man's Switch

handlers/deadmans_switch.go

  • Heartbeat monitoring
  • Automatic triggers
  • Configuration management
  • Failsafe protocols

CLI Activation Tool

scripts/kill-switch.sh

  • Interactive interface
  • Triple confirmation
  • Fleet targeting
  • Audit logging

Heartbeat Service

scripts/heartbeat-master.sh

  • Master keepalive
  • Health monitoring
  • Dead man's prevention
  • Status reporting

⚠️ Important Warnings

IRREVERSIBLE OPERATIONS: All destruction operations are permanent and cannot be undone.
ZERO RECOVERY: The system is designed to resist forensic analysis and prevent data recovery.
LEGAL COMPLIANCE: Use only within legal boundaries and proper authorization procedures.

πŸ“‹ Testing & Validation

For safe testing of the kill switch system:

  1. Isolated Environment: Use disposable VMs or containers only
  2. Level 1 Testing: Test memory purge in safe environments
  3. Dummy Data: Use fake data for destruction validation
  4. Monitoring: Always monitor test execution carefully
Testing Script Available: Use scripts/test-killswitch.sh for safe validation

πŸ”— Related Documentation

REMEMBER: This system is for EMERGENCY USE ONLY. Always follow proper authorization procedures and maintain operational security.